International Journal For Multidisciplinary Research

E-ISSN: 2582-2160   •   Impact Factor: 9.24

A Widely Indexed Open Access Peer Reviewed Multidisciplinary Bi-monthly Scholarly International Journal

Call for Paper Volume 8, Issue 6 (November-December 2026) Submit your research before last 3 days of December to publish your research paper in the issue of November-December.

Use of Waste Ceramic Dust from Tile Industries as a Filler in M40 Grade Rigid Pavement Concrete: An Experimental Study

Author(s) Mr. Amit kumar, Mr. Ashish Singh
Country India
Abstract This paper presents an experimental investigation on the use of waste ceramic dust (WCD) from tile industries as a partial replacement of fine aggregate in M40 grade rigid pavement concrete. Five concrete mixes were prepared with 0%, 5%, 10%, 15%, and 20% ceramic dust content by weight of fine aggregate. Fresh concrete workability was assessed using the slump test. Hardened concrete properties including compressive strength, split tensile strength, flexural strength, and density were evaluated at 28 and 56 days of curing. Durability performance was assessed through water permeability and sulphate attack resistance tests. The results show that concrete with 10% ceramic dust replacement achieved the highest compressive strength (52.6 MPa at 28 days and 56.8 MPa at 56 days), the maximum split tensile strength (4.20 MPa and 4.55 MPa), and the highest flexural strength (5.75 MPa and 6.10 MPa) compared to the control mix. Density improved to 2490 kg/m³ and 2505 kg/m³ at 28 and 56 days respectively. Water penetration depth reduced by 25% at 28 days and 29% at 56 days, while weight loss due to sulphate attack decreased by 46% and 49% respectively at 10% replacement. Beyond 10% replacement, all properties showed a declining trend. The study concludes that 10% waste ceramic dust is the optimum replacement level for producing strong, durable, and sustainable rigid pavement concrete.
Keywords Ceramic dust; Rigid pavement; M40 concrete; Compressive strength; Flexural strength; Durability; Waste utilization
Field Engineering
Published In Volume 8, Issue 3, May-June 2026
Published On 2026-06-16

Share this