International Journal For Multidisciplinary Research
E-ISSN: 2582-2160
•
Impact Factor: 9.24
A Widely Indexed Open Access Peer Reviewed Multidisciplinary Bi-monthly Scholarly International Journal
Home
Research Paper
Submit Research Paper
Publication Guidelines
Publication Charges
Upload Documents
Track Status / Pay Fees / Download Publication Certi.
Editors & Reviewers
View All
Join as a Reviewer
Reviewer Referral Program
Get Membership Certificate
Current Issue
Publication Archive
Conference
Publishing Conf. with IJFMR
Upcoming Conference(s) ↓
WSMCDD-2025
GSMCDD-2025
Conferences Published ↓
RBS:RH-COVID-19 (2023)
ICMRS'23
PIPRDA-2023
Contact Us
Plagiarism is checked by the leading plagiarism checker
Call for Paper
Volume 6 Issue 5
September-October 2024
Indexing Partners
Design and Fabrication of Switched Reluctance Motor for Energy Efficient Operation by Minimizing Torque Ripple
Author(s) | Dr.M.Ravindran |
---|---|
Country | India |
Abstract | Around the world, motor is consuming more than 40% of the total-generated electrical energy. Accordingly, energy efficient electrical drives are the needs of the hour. The Switched Reluctance Motor (SRM) is more energy efficient than other kinds. Since SRM has a rugged structure, it has inherent fault tolerance characteristics and is cost-effective than synchronous and induction machines. Nevertheless, the application of such a motor is limited due to low torque density, torque ripples and power losses because of control circuit. In this research work, the author proposed a novel-designed SRM, which is achieved by optimizing stator and rotor pole arc. Alongside, a novel control circuit, which has single transistor, is proposed. The modification of stator and rotor pole arcs assists in the reduction of the torque ripple. The stator pole arc is modified from 32 degree to 36 degree, and the rotor pole arc is modified from 30 degree to 28 degree. Thus, the torque ripple is reduced from 3.25 to 2.92 Nm, and thus, the useful torque is increased from 4.94 to 5.2 Nm. Furthermore, a single transistor switching device is used instead of the conventional one with four switches. Hence, energy loss on the control circuit is significantly reduced. From the experimental analysis, it is found that, with-pole-arc modified SRM has higher efficiency than the one without it. |
Keywords | Switched reluctance motor, Pole arc modification, Torque control, Energy conservation, Driver circuits, Harmonic distortion |
Field | Engineering |
Published In | Volume 6, Issue 2, March-April 2024 |
Published On | 2024-03-10 |
Cite This | Design and Fabrication of Switched Reluctance Motor for Energy Efficient Operation by Minimizing Torque Ripple - Dr.M.Ravindran - IJFMR Volume 6, Issue 2, March-April 2024. DOI 10.36948/ijfmr.2024.v06i02.14482 |
DOI | https://doi.org/10.36948/ijfmr.2024.v06i02.14482 |
Short DOI | https://doi.org/gtmzvr |
Share this
E-ISSN 2582-2160
doi
CrossRef DOI is assigned to each research paper published in our journal.
IJFMR DOI prefix is
10.36948/ijfmr
Downloads
All research papers published on this website are licensed under Creative Commons Attribution-ShareAlike 4.0 International License, and all rights belong to their respective authors/researchers.