International Journal For Multidisciplinary Research

E-ISSN: 2582-2160   •   Impact Factor: 9.24

A Widely Indexed Open Access Peer Reviewed Multidisciplinary Bi-monthly Scholarly International Journal

Call for Paper Volume 8, Issue 6 (November-December 2026) Submit your research before last 3 days of December to publish your research paper in the issue of November-December.

Advanced Piezoelectric Nanocomposites for Low-Frequency Vibration Detection and Energy Harvesting

Author(s) Alka Vishwakarma, Dr. Mohit Bajpai
Country India
Abstract Advanced piezoelectric nanocomposites convert low-frequency mechanical vibrations (typically <100 Hz) into usable electrical energy by embedding active nanostructures into flexible or rigid matrices, making them ideal for self-powered sensors and wearable electronics. [1, 2]

Key Materials and Performance
Lead Zirconate Titanate (PZT):
Delivers the highest electromechanical coupling and energy efficiency, though it is brittle and faces lifecycle degradation under heavy cyclic loads. Thinned bulk or composite layers help reduce its stiffness. [1, 2, 3]
Barium Titanate (BTO/SU-8):
Produces strong output performance (such as ~642 µW at resonance in conventional cantilever setups) with better environmental compatibility than lead-based alternatives. [1]
Zinc Oxide (ZnO):
Offers lead-free, non-ferroelectric operation, easy nanorod/nanowire manufacturing, and high flexibility for human-motion tracking (generating microwatt-scale outputs). [1, 2, 3]
Polyvinylidene Fluoride (PVDF):
A biocompatible polymer matrix that provides high mechanical flexibility and durability tailored for low-frequency and wearable applications
Low-Frequency Optimization Strategies
Double/Multi-Layer Nanocomposites: Combining micropillar arrays with thick matrix layers (e.g., PZT–PDMS) concentrates mechanical strain and boosts open-circuit voltage significantly. [1]
Frequency Up-Conversion & Resonance Tuning: Because ambient vibrations are often slow (<10 Hz to 50 Hz), designs use magnetic plucking, quasi-zero stiffness (QZS) structures, or gravity-induced self-excited generators to shift low inputs up to higher resonant frequencies. [1, 2, 3]
Hybrid Systems: Integrating piezoelectric transduction with triboelectric or electromagnetic mechanisms broadens the operational bandwidth and increases overall power density. [1, 2]
Keywords Piezoelectric, nanocomposites, detection, vibration, harvesting, low-frequency
Published In Volume 2, Issue 4, July-August 2020
Published On 2020-07-09
DOI https://doi.org/10.36948/ijfmr.2020.v02i04.89447

Share this